Changzhou WL Allotech Material Co.,Ltd
Changzhou WL Allotech Material Co.,Ltd
Add to Cart
Inconel 601 Special Alloy UNS N06601 High Performance Alloys For Strand-Annealing And Radiant Heater Tubes
Product Description
Inconel Alloy 601 (UNS designation N06601) is a nickel-chromium-iron based solid solution strengthened alloy. It has good high temperature corrosion resistance, oxidation resistance, excellent hot and cold processing and welding properties, and has satisfactory thermal strength and high plasticity below 700°C. The alloy can be strengthened by cold working, and can also be connected by resistance welding, solution welding or brazing. It is suitable for making anti-oxidation parts that can withstand low loads below 1100°C.
Similar Grade
| GB | UNS | DIN | W-Nr | BS |
| NS1402 | N06601 | NiCr21Mo | 2.4858 | NA16 |
Chemical Composition(%)
| % | Ni | Cr | Fe | C | Mn | Si | P | S | Al | Ti | Mo | Cu |
| Min | 42.0 | 19.5 | Rest | 0.1 | 1.9 | 2.5 | 1.5 | |||||
| Max | 46.0 | 22.5 | Rest | 0.03 | 1.0 | 0.5 | 0.03 | 0.03 | 0.5 | 2.4 | 3.5 | 3.0 |
Physical Properties
| Grade | Density | Melting Point | Tensile strength,MPa | Yield strength,MPa | Elongation,% |
| Inconel 601 | 8.08g/cm3 | 1311°C-1366 °C | 1210 | 810 | 24 |
Feature
Outstanding resistance to oxidation at high temperatures;
Good resistance to carburizing conditions;
Good mechanical properties at both room and elevated temperatures
Inconel 601 has good resistance to stress-corrosion cracking and is specifically recommended for service above 550 C because of higher creep-rupture properties, resulting from controlled carbon content and coarse grain size
Specification Standard
| Rod,Bar | Pipe, Tube | Plate, Sheet, Strip | Pipe fittings | Forgings | Wire |
|
STM B425,B564 ASME SB425, SB564 DIN17752, DIN 17753 |
ASTM B163,B423,B775, B626,B751 |
ASTM B424 ASTM B906 |
ASTM B366 |
ASTM B564 ISO 9725,DIN 17754 |
DIN 17753 ISO 9724 |
APPLICATIONS
· Trays, baskets and fixtures for heat treatment plant
· Strand-annealing and radiant heater tubes, high-velocity gas burners, wire mesh belts in industrial furnaces.
· Insulating cans in ammonia reformers and catalyst support grids in nitric acid production
· Components in exhaust gas systems
· Combustion chambers in solid waste incinerators
· Tube supports and ash-handling components
· Components of waste-gas detoxification systems.
· Oxygen preheaters